aeroproyecto.freetzi.comAEROPROYECTO

Thank you for playing with us... This message is because , some of which come from user preferences. This is a standalone product, but can be used to update any of the previous versions, if applies. It is compatible with FSX, FSX:SE and P3Dv1-v5; and uses 760MB of extra space in the Hard Drive. Expand for details... External and interior model Highly accurate and optimised modelling for good performance; every visible part on interior and exterior is modelled in detail Elevator angle is affected by trimming setting due to prop wash or the free airstream; the yoke feedback is due to this action as well Almost every moving part or mechanism is animated. Engine vibration is simulated, as well as flexible items like antennas and static dischargers. Texturing is applied depending on the relevance of the point of view, providing the user with a nice environment while keeping a friendly Frame Rate even on modest hardware Ambience reflections, bumps, damage, dirt and sun reflection effects are applied everywhere Any door, previously open, will close due to the force of prop wash or the free airstream from frontal wind even if the aircraft is stopped The cabin can be full of occupants, depending on the individual payload station weight setting. Pilot arms are animated with the pilot’s yoke and all characters have natural animations on heads and eyelids. Pilot’s headset is optional as well. Several cameras are included for external inspection or just for an alternative point of view for your enjoyment Custom 3D lights in all positions for a better visual experience. The landing and taxi light includes a spotlight effect that is stronger on low visibility days or nights Propeller damage is simulated whenever it hits the ground Virtual cockpit Warm fully 3D ambience is experienced in the cockpit by the use of a right balance between shadows and lights, relaxing colour tones, precise and detailed model, and two different upholstery works Interior illumination is "real", no texturing night-bright is used apart from gauges, in an attempt to offer a nice feeling. For easiest access in darkness, two custom key combinations are included in the cockpit view. Full 3D gauges in two different avionics set-ups which offer: - Sound panel Garmin GMA 340 - Custom GPS Garmin GNS 430 or Bendix/King KX 155 TSO radio 1 - Bendix/King KX 155 TSO radio 2 - Transponder Garmin GTX 330 - Empty or Collins ADF 650 TSO receiver (and NDB finder) - Empty or Bendix/King DME receiver Optional dynamic precipitation drops on windshield and windows. Wings project ’precipitation shadow’ on lateral windows when you stay immobile under the rain Four interior cameras are included: Pilot, avionics zoom, front passenger and rear-right passenger The pilot’s yoke is removable for accessing light switches and the fully functional breakers. Pilot’s headset can be put on/off Almost everything you can see in the cockpit is functional and/or animated. Doors and handles, switches, buttons, sunshields, windows, pilot’s yoke lock, levers, yokes cord and so on 2D panels are included for setting up the aircraft, reading checklists, checking cabin temperature, extinguishing fire, the aircraft tow tool and more Every mouse action could be useful over several buttons, switches, levers or animated objects, giving the user more flexibility and/or accuracy for dealing with the many cockpit functions Custom key combination to reset the engine and DATCON counters. It also lets you save its records when saving the flight Paint schemes G-GNRT - blue strips based on 1980 Cessna factory scheme, UK N907WA - flight school scheme, USA N905WA - flight school scheme, USA EC-BLT - fictional scheme, Spain D-EXEC - fictional scheme, Germany C-FCXV - fictional scheme, Canada N403CP - fictional scheme, USA White template for re-painters Systems and additional features Engine combustion with more realistic performance and failures are simulated based on carburettor icing, soiled spark plugs, engine condition or even water ingestion The engine can burn or fail permanently due to abuse. The fire can be extinguished in flight with the proper procedure or on the ground using a fire extinguisher. Stall horn system is realistically replicated; as in the actual aircraft, you can fly indefinitely with the stall warning sound Engine smoke and fire effects are included. Also, the engine fire emits a sound to warn the pilot. Custom sounds for switches, avionics buttons, engine, wheel roll, stall horn and doors Complex electrical system with functional breakers affecting each system Cabin temperature system is included. Conditions like cabin seal (doors, windows, heat lever and air lever positions), engine heat, external temperature, airstream produced by the propeller and the external free airstream will affect the cabin temperature. CESSNA C172N Floatplane R1.3 for Flight Simulator X / Prepar3D SimMarket FlightSim JustFlight PcAviator The Cessna 172N was not officially build to support water floats, however a certain number of it were mounted on straight floats by their owners. Amphibian modifications are less frequent; however, I decided to develop this variation based in float manufacturers that have been successfully doing this job over decades. This C172N Floatplane V1.3 Extended Edition” offers two variants: Straight float, which includes two engines 160HP and 180HP; and an amphibian variant, mounted on wheels. This variant only have option for a 180HP engine, due to the increased weight 160HP engines are inadequate. Every variant have it own dynamic response, are not just aesthetic changes. This edition also refines systems and programming, as well as 3D modelling and on water performance details. Additional features for better experience are included, some of which comes from user preferences. This is a standalone product, but can be used to update any of the previous versions, if applies. It is compatible with FSX, FSX:SE and P3Dv1-v5; and uses 880MB of extra space in the Hard Drive. Expand for details... External and interior model Highly accurate and optimized modeling for good performance; every visible mechanism or part on interior and exterior are modeled in detail Elevator angle is affected by trimming setting due to prop wash or the free airstream; the yoke feedbacks due to this action as well Almost every parts or mechanism is animated in the external and internal model. Engine vibration is simulated, as well as flexible items like antennas and static dischargers. Pitot cover ends and tie-down ropes dance with the airspeed Texturing are applied depending on the relevance of the point of view, providing the user with a nice environment while keeps a friendly Frame Rate Ambience reflections, bumps, damages, dirt and sun reflect effects are applied, no matter the angle you are looking Open doors will close depending on the intensity of prop wash airstream or the angle and the intensity of the wind, in case you are stopped The cabin can be filled with occupants, depending on the individual payload station weight setting. Pilot arms are animated with the pilot´s yoke and all characters have natural animations on heads and eyelids Several cameras are included for external inspection or just for alternative point of views for your enjoyment Custom 3D lights in all positions for a better visual experience. The landing and taxi light includes an spotlight effect that is stronger at low visibility days or nights Custom floats water spray and wake effect Virtual cockpit Warm fully 3D ambience is experimented on the cockpit by the use of a right balance between shadows and lights, relaxing colors tone, precise and detailed model, and a leather upholstery work Interior illumination is "real", no texturing night-bright are used apart of gauges, in an attempt to offer the right ambience feeling. A red and white cabin lights combines to offer a realistic night flying experience. For easiest access in darkness, two custom keys combination...